BWMZR - 1402 INT LTX FLT TINT BASE

  • MSDS: BWMZR
  • Manufacturer: VALSPAR CORP
  • Product Name: 1402 INT LTX FLT TINT BASE
  • National Stock Number: 8010-00N056210
Product Identification

Product ID:1402 INT LTX FLT TINT BASE
MSDS Date:12/18/1987
FSC:8010
NIIN:00N056210
MSDS Number: BWMZR

Responsible Party
VALSPAR CORP
1101 THIRD ST S
MINNEAPOLIS, MN 55415
US

Emergency Phone: 800-228-5635

Info Phone: 612-332-7371

Cage: 13418

Contractor
VALSPAR CORPORATION
MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371/800-228-5635

Cage: 13418

Ingredients

2))

CAS: 22708-90-3

Fraction By Weight: 10%

OSHA PEL N/K

ACGIH TLV: N/K


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 9%

OSHA PEL N/K

ACGIH TLV: 50 PPM, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PROPANOIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1%

OSHA PEL N/K

ACGIH TLV: N/K


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50%

OSHA PEL N/K

ACGIH TLV: N/K


1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


VINYL ACRYLIC COPOLYMER

Fraction By Weight: 19%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF INHALED. MAY AFFECT
BRAIN, NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION. CHRONIC: CONTAINS
INGREDIENTS WHICH MAY CAUSE LIVER DA MAGE, KIDNEY DAMAGE, NERVOUS
SYSTEM DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY OR SKIN CONDITION.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE
ARTIFICIAL RESPIRATION/OXYGEN) . EYE: FLUSH WITH WATER FOR AT LEAST
15 MINUTES. SKIN: WASH WITH SOAP AND WATER. INGESTION: CALL MD
IMMED IATELY .

Fire Fighting

Flash Point Method:TCC
Flash Point:141F,61C
Lower Limits:8%
Upper Limits:25%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS WITH INERT
ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE ABOVE 120F. KEEP FROM FREEZING. EMPTY CONTAINERS
MAY CONTAIN PRODUCT RESIDUE.
Other Precautions:DO NOT CUT, PUNCTURE OR WELD CONTAINERS. ALL LABEL
WARNINGS MUST BE OBSERVED UNTIL CONTAINER HAS BEEN CLEANED,
RECONDITIONED OR PROPERLY DISPOSED OF.

Exposure Controls

Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIREC TIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED WHEN SPRAYING OR APPLYING IN CONFINED AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:24.0 @ 77F
Vapor Density:7.4
Spec Gravity:1.31
Evaporation Rate & Reference:0.4 (BUTYL ACETATE=1)
Solubility in Water:YES
Appearance and Odor:NORMAL FOR COATINGS PRODUCT.
Percent Volatiles by Volume:69.33

Stability

Stability Indicator/Materials to Avoid:YES
WATER-REACTIVE MATERIALS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON
DIOXIDE/MONOXIDE, METAL OXIDES.

Disposal

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.